Shopping Basket
M365 Pro MJ1048 - Dashboard

M365 Error Codes – why is my M365 or M365 Pro beeping?

Looking for M365 error codes?

If your Xiaomi M365 and/or M365 Pro is beeping/flashing and you’re fearing the worse, then you’ve come to the right place.

How can I tell which codes are which?

M365 and M365 Pro error codes are two digits.
1 – The first is a long signal
2 – The second is a short signal

This code error formula may vary depending on the firmware of future updates.
The M365 Pro also displays the error on the dashboard.

To save you a load of time (and to stop you hunting around for Xiaomi M365 and Xiaomi M365 Pro error codes), we’ve compiled a list of useful error codes:


10 – Bluetooth (BLE) module communication error (Bluetooth module)
11 – Current sensors calibration errors or Power MOSFET error
12 – Current sensors calibration error
13 – Current sensors calibration errors or Power MOSFET error
14 – Throttle and brake errors
15 – Throttle and brake errors
16 – Undefined
17 – Undefined
18 – Motor Hall sensors error
19 – Undefined
20 – Undefined
21 – BMS communication error
22 – Bad BMS serial number/password
23 – Bad BMS serial number/abnormal error
24 – Wrong supply voltage
25 – Undefined

26 – Check the controller (Save operation in the Flash memory maybe wrong)
27 – Bad controller password
28 – MOSFET error
29 – ESC has wrong serial number in memory or “not activated”
28 – MOSFET error
29 – MOSFET is abnormal
30 – Undefined
31 – Program error
32 – Undefined
33 – Undefined
34 – Undefined
35 – Serial number of the scooter is wrong
36 – Battery temperature sensor error or device is overheating
37 – Undefined
38 – Undefined
39 – Scooter temperature is abnormal
40 – Main controller temperature sensor error or overheating

Always use both electric brake and foot brake for emergency stopping. Otherwise you risk falls and/or collisions from not achieving the max. braking capability.
Do not connect the charger if the charge port or charge cable is wet.
Do not wash your KickScooter with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the appearance and internal structure of your KickScooter. Do not wash your KickScooter with a power washer or hose.

Original lists compiled by @CamiAlfa and MiMod